Why Green Silicon Carbide GC Can be used as a Non-Linear Conductive Filler?

Why Green Silicon Carbide GC Can be used as a Non-Linear Conductive Filler?

First, what is “non-linear conductivity”?
Non-linear conductivity means that electrical resistance is not constant; instead, it changes automatically in response to an applied voltage (electric field).
Green silicon carbide (α-SiC) is a semiconductor powder that exhibits voltage-dependent, non-linear resistance (varistor-like behavior). This is the fundamental reason why it can be used as an anti-corona filler for high-voltage electrical machinery.

1. The inherent semiconductor properties of green silicon carbide crystals

SiC is a wide-bandgap semiconductor—it is neither a good conductor nor a pure insulator:
At low electric fields (low voltage), the resistance is very high—approximating an insulator—resulting in minimal leakage current.
When the electric field exceeds a certain threshold, charge carriers are excited, causing the resistance to drop rapidly and the current to increase automatically.
In short: the higher the voltage, the lower the resistance, which allows for the automatic distribution (equalization) of the electric field. This characteristic is known as a non-linear current-voltage (I-V) relationship.
By comparison, white fused alumina and brown fused alumina are insulators; their resistance remains virtually unchanged regardless of voltage, making them unsuitable as anti-corona fillers. While black silicon carbide also exhibits non-linearity, it contains higher levels of impurities and lacks consistent electrical properties. Consequently, the high-voltage insulation industry prefers high-purity green silicon carbide.

2. “Inter-particle conductive pathways” in composite powders

When green silicon carbide micropowder is dispersed within an epoxy resin coating or a fiberglass anti-corona tape, the particles are positioned close to one another without being directly sintered together:
At low voltage, the potential barriers between the particles are high, preventing conduction and resulting in high overall resistance.
In areas where the electric field becomes concentrated (such as at the sharp corners or burrs of coil ends), the local field strength exceeds the threshold. This triggers conduction at the particle interfaces, lowering the local resistance. This process dissipates and spreads out the excessive electric field, thereby suppressing corona discharge and preventing localized arcing or dielectric breakdown. Rather than facilitating a continuous, high-current flow, the material acts to “shave off” local field peaks and equalize the voltage—precisely the function required for anti-corona protection in high-voltage electrical machinery.

3. Why choose green silicon carbide (GC) instead of other varistor powders (such as zinc oxide/ZnO-based powders)?
Green silicon carbide (GC) offers superior high-temperature resistance: motor coils can reach operating temperatures exceeding 150°C, whereas zinc oxide is prone to aging and leakage current drift at high temperatures.
Green silicon carbide (GC) exhibits excellent resistance to electrical aging and erosion from partial discharge, ensuring a longer service life under high-voltage alternating electric fields.
Green silicon carbide (GC) possesses high hardness and chemical stability, and it is highly compatible with epoxy and polyester insulating varnishes.
The particle size of green silicon carbide (GC) is controllable; it can be processed into fine micropowders, facilitating precise formulation adjustments to regulate the initial conduction field strength.

Send your message to us:

Inquire now

Scroll to Top